Supplier of Linear Low-Density Polyethylene (LLDPE) From Turkey and Dubai-UAE

LLDPE Supplier
Table of Content

We are an export-focused LLDPE Supplier providing Linear Low‑Density Polyethylene (LLDPE) resin pellets to converters, distributors, and manufacturers worldwide. LLDPE is produced by copolymerizing ethylene with alpha‑olefins (C4/C6/C8) and is valued for its high toughness, strong puncture/tear resistance, excellent flexibility, and reliable processability.

If you need a stable supply for blown film, cast film, injection molding, blow molding, or extrusion, our team helps you select the right grade and ship it efficiently with the required technical and export documentation.

Get a fast quotation: Send your required MI (MFI), density, application, quantity, and destination port.

Why Buyers Choose Our LLDPE Supply

As a professional LLDPE Supplier, we focus on what matters to importers and factories:

  • Consistent quality & repeatability: lot traceability and shipment documents available
  • Grade matching support: recommendations based on MI/density and end‑use performance targets
  • Export-ready packing: 25 kg / 50 kg bags and jumbo bags (where available)
  • Efficient logistics: container loading planning to reduce cost and damage risk
  • Trade documents prepared correctly: to support customs clearance and receiving QC

If you are comparing vendors, ask any LLDPE Supplier for COA format, tolerances, and what happens if a grade is unavailable—this is where dependable suppliers stand out.

What Is LLDPE?

Linear Low‑Density Polyethylene (LLDPE) is a polyethylene resin with a mainly linear backbone and short‑chain branching. This structure typically delivers a strong balance of:

  • Tensile strength + high elongation
  • Excellent impact performance
  • Good sealability (in many film structures)
  • Low moisture absorption
  • High resistance to many chemicals (depending on exposure and temperature)

Because of these properties, many converters source LLDPE for packaging films, industrial liners, geomembranes, flexible tubing, and molded products.

Typical LLDPE Properties (Specifications)

Typical ranges vary by manufacturer, comonomer type (C4/C6/C8), and test methods (ASTM/ISO). A reliable LLDPE Supplier should provide grade-specific TDS and a lot COA for each shipment.

Property Typical Range / Notes
Chemical Formula (C₂H₄)ₙ
Density 0.915 – 0.925 g/cm³
Melting Point ~120 – 125°C
Tensile Strength ~8 – 25 MPa (grade-dependent)
Elongation at Break ~300 – 600% (grade-dependent)
Hardness Shore D ~50 – 60
Moisture Absorption Negligible
Chemical Resistance Generally strong vs. acids/bases/alcohols (verify for specific media)
Processing Blown film, cast film, extrusion, injection molding, blow molding
Melt Flow Index (MI/MFI) Varies widely by grade (select based on your process)

Common buyer tip: For film applications, performance is often evaluated using dart impact, tear (MD/TD), haze/gloss, seal strength, and ESCR—request these from your supplier when needed.

LLDPE Grades We Supply (By Process)

As your LLDPE Supplier, we can offer grades suited to different manufacturing methods. Share your target MI/density and application, and we will recommend a suitable option based on availability.

Film Grade LLDPE (Blown Film / Cast Film)

Typical products:

  • Stretch wrap and pallet wrap
  • Heavy-duty sacks and liners
  • Food and industrial packaging films (grade/compliance dependent)
  • Multilayer co‑extruded films (often blended with LDPE/HDPE)

Key selection factors: MI, density, dart impact, tear strength, sealability, optics (haze/gloss).

Injection Molding Grade LLDPE

Typical products:

  • Caps, lids, closures
  • Household goods and flexible parts
  • Tough components requiring ductility and impact resistance

Key selection factors: MI, stiffness/impact balance, cycle time needs, part design.

Blow Molding Grade LLDPE

Typical products:

  • Bottles, jerrycans, drums, and hollow parts (application dependent)

Key selection factors: ESCR, stiffness, impact, and processing stability.

Extrusion Grade LLDPE

Typical products:

  • Sheets and protective films
  • Geomembranes/liners and industrial barriers
  • Profiles and coating layers (where applicable)

Key selection factors: melt strength, toughness, and environmental exposure (UV stabilization if required).

A good LLDPE Supplier will also discuss blend options (LLDPE/LDPE/HDPE) when customers need a specific balance of stiffness, seal performance, and cost.

Main Applications of LLDPE

LLDPE is widely used across multiple industries, including:

  • Packaging: stretch film, shrink film, shopping bags, liners, pouches, lamination films
  • Agriculture: mulch film, greenhouse film, silage wrap, irrigation tubing, UV-stabilized outdoor films
  • Industrial & Environmental: protective sheeting, geomembranes, containment liners, cable protection
  • Construction: vapor barriers, waterproof membranes, barrier films
  • Consumer products: lids, toys, storage items, flexible tubing, and covers
  • Automotive/Electrical: protective films and selected insulation/jacketing applications (grade dependent)

Importers often choose one primary LLDPE Supplier to standardize resin performance across factories and reduce production variation.

LLDPE vs. LDPE vs. HDPE (Quick Comparison)

  • LLDPE vs LDPE: LLDPE typically offers higher tensile and better puncture/tear resistance, making it a preferred choice for tougher films (e.g., stretch wrap).
  • LLDPE vs HDPE: LLDPE is generally more flexible and can provide strong impact performance in flexible applications, while HDPE is usually stiffer.

If you share your product requirements, we can recommend whether pure LLDPE or a blend is best.

Export Packing Options (Bags / Jumbo Bags)

We supply LLDPE in pellet form with export packing options such as:

  • 25 kg bags
  • 50 kg bags
  • Jumbo bags

Your LLDPE Supplier should confirm palletization, labeling (grade/lot/net weight), and moisture protection requirements for your destination market.

Container Loading (Typical Guidance)

Actual payload depends on packing type, pallets, and local road/container regulations. Typical guidance:

  • 20-ft container: approximately 16–20 MT of bagged LLDPE (approx.)

We can support optimized stuffing plans to reduce bag damage and improve unloading efficiency—key value-add services from an experienced LLDPE Supplier.

Export Documents Available (On Request)

International buyers typically require documentation for customs clearance and receiving QC. We can provide, depending on grade and shipment terms:

  • TDS (Technical Data Sheet)
  • COA (Certificate of Analysis)
  • SDS/MSDS
  • Packing List + Commercial Invoice
  • Certificate of Origin (when required)
  • HS code guidance: LLDPE is commonly declared under HS 3901.10 in many markets (confirm with your local customs broker)

If your market requires additional declarations (REACH/RoHS/food-contact statements), request them during the quotation stage so we can confirm availability for the selected grade.

How to Buy / Request a Quote (What We Need)

To receive an accurate offer from your LLDPE Supplier, please send:

  1. Application: film/injection / blow molding/extrusion
  2. Target MI (MFI) + density (or your current reference grade)
  3. Quantity: trial order and/or monthly requirement
  4. Destination: country + port
  5. Incoterms: EXW / FOB / CFR / CIF (your preference)
  6. Packing: 25 kg / 50 kg / jumbo bag

We will reply with: available grade options, lead time, packing details, and a commercial quotation.

Storage & Handling (For Importers and Warehouses)

  • Store in a cool, dry, ventilated area away from direct sunlight and heat sources.
  • Keep bags sealed and in original packaging to prevent contamination.
  • Avoid contact with strong oxidizing agents.
  • Handle pallets carefully to reduce bag damage and pellet loss.

FAQ (Common Buyer Questions)

1) What lead time can you offer as an LLDPE Supplier?
Lead time depends on grade availability, order size, and shipping schedule. Share your specs and destination port, and we will confirm the next shipment window.

2) Do you support trial orders?
Yes. Many customers start with a trial container (or smaller quantity where possible) to validate processing and finished product performance.

3) Which LLDPE grade is best for stretch film?
Usually, a film-grade LLDPE is selected based on MI/density and required dart impact, tear strength, and seal performance. Send your film thickness and target properties for a recommendation.

4) Can you ship with full export documents?
Yes—TDS, COA, and SDS are commonly requested. Tell us your destination requirements, so wecan prepare documents correctly for customs clearance and QC.

Contact / RFQ (Copy-Paste Message Template)

To speed up your quote, send this message:

  • Product: LLDPE resin
  • Application: (film/injection/blow/extrusion)
  • Target MI (MFI): ____
  • Density: ____
  • Quantity: ____ MT
  • Destination port/country: ____
  • Incoterms: (FOB/CFR/CIF/EXW)
  • Packing: (25 kg / 50 kg/jumbo)

If you want, share your target countries and the grade/MFI ranges you typically sell—then I can tailor this page further (with localized keywords, stronger above-the-fold CTA text, and a tighter “product offer” section) without adding any risky or unverifiable claims. (Contact Us)